Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to configure the isakmp identity as address on one VPN tunnel and fqdn on all others on a particular device or can it only be set globally?
Hi,I am trying to translate a host coming in over a VPN on a PIX running 6.3(1) with no success.I have tried a static mapping and also a nat with a global as follows:nat (outside) 3 10.10.10.0 255.255.255.0 outside 0 0global (inside) 3 192.168.168.16...
Hi,Can anyone tell me what the message:crypto_isakmp_process_block:src:x.x.x.x, dest:y.y.y.y spt:500 dpt:500ISAKMP: reserved not zero on payload 8!might mean?Lisbeth
Hi,I am trying to set up one time enable authentication using Safeword version 3.1.1 and Cisco Secure ACS v. 3.2.So far I have configured the unknown user database to use the safeword server as an authentication database. Within ACS I have mapped a g...
Let me clarify.I have a vpn user coming in with a 10.x.x.x/24 address which I want to translate to a 192.x.x.x/24 address for access to another 172.x.x.x address on my internal networkMy problem is that I am not doing the natting correctly and the v...
Hi Glenn,I have had the message "reserved not zero on payload 5!" where this has indeed been the case. In this instance the message appears in debug for a VPN between a Checkpoint firewall and a PIX that is, to all intents and purposes, working (and ...
