Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, we setup a Cisco 1721 to work with Comcast cable (DHCP address from ISP) in a small SOHO environment. All the clients/host on the LAN are getting an IP address and can ping the gateway but we cannot get to the outside world (Internet). Your help ...
Hi, we setup a Cisco 1721 to work with Comcast cable (DHCP address from ISP) in a small SOHO environment. All the clients/host on the LAN are getting an IP address and can ping the gateway but we cannot get to the outside world (Internet). Your help...
Well hello again, so far everything works without ACL 100. Once ACL 100 is applied inbound, the VoIP phones will not work and Cisco VPN sessions initiated from within to HQ are terminated locally by client (error 412) I've also configured the router ...
Hey Rick,Excellent points, thank you very much, and yes I do have ssh set up on this router instead of telnet. I will edit the ACLs and post the config for comments.Thanks again,Charles
Hi again,Ok, below is what I've come up with for the ACLs; your input/suggestions are greatly appreciated - Two points:1.- Do you have any suggestions for improving the speed/performance (this thing is crawling without the ACLs, can't imagine once ap...
Rick,First of all many thanks for your help; I was seeing in the ARP table a lot of incomplete. I've modified the config including the ACL (but will not apply them yet, will wait for input), I configured the next hop as well; attached is what the new...
Hi, I've done major changes to the config and at least now I am getting and IP address on the public interface, but I still cannot gain internet access. Here is the current config:interface Ethernet0 description WAN Interface to Comcast ip address dh...
