Hi,I have Cisco 6509 with MSFC 3 / SUP 720 with recently installed 2 port adapter FlexWAN 2 Card.Cisco 6509 is running with s72033-pk9s-mz.122-17a.SX4.bin image which is not supporting the module.Minimum IOS for the module is 12.2(17a)SXA.binEven I a...

Hi,One of our customer is using ifInoctet & ifoutoctet MIB for collecting the traffic utilization on all interfaces.(MRTG or any SNMP supporting Device.)There is one script which collects traffic for all interfaces which are up.We are using Cisco 355...

Hi all,I have found the LED's of the Cisco 3745 are not glowing. The router was powered off to check the LED status. Evenafter rebooting the Router, the LEDs were not glowing.The Router is operational but in the front panel none of the LED's are glow...

Hi,One of our customer is having Cisco 4840G Switch.I am getting following Error on the same.Please suggest....Error Logs :00:01:11: xpif_port_write_mii: Timeout for response message GigabitEthernet41Line 1602 mmc_gmac_software_auto_negotiate : Write...

Hi,One of our customer is having Cat 4840G Switch. We have rectified that the flash is gone faulty. we have to raise RMA for the same. Can anyone give me the exact Part Number for its 16MB Flash.Otherwise give me the Part Number for Cat 4840G Switch....