Having problems with packet errors between a 2950 and 1410. Running packets size at 1500 and sending 50000 I get about 98% ok. Also with a 3550 switch I get zero errors with this same test.... Any ideas? This is between the radio and this 2950 sw...
I have a hop installed with 2 1410s and about 120 pcs at the nonroot end. This is a very short path about 1000 ft. Will I be ok using 2 28 dbi 2ft dishes pointed at each other as far as too much signal is concerned. I have power set to minimum on ...
i have several 340,s and need to know if i should upgrade them to the latest ver 8.80. They will eventually be replaced with br 350 thanks for your time
Bravo thanks for the great info on this problem.....I did just what you said and work perfect afterwards.....Also my signals were about -23dbm....1kft at max on a 2 ftdish so i reduced power to minimum and swapped the dish for a 1 ft one thanks
