Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Customer has two Ha-pairs of 2504. Now the first ones license is becoming full. I need to move some of the ap's from first HA-pair to second.Network layout is pretty simple. HA-pair 1 is at network same network with ap's with ip 192.168.91.0/24. Seco...
That did it. I have slightly different names at .92 controllers. And when i used exactly same sysname as in under Controller -> general - > name I got ap's to change the controller. I didn't know that the name was also factor when choosing controller...
Didn't find any log related to this. There were Master controller enabled but removing it did nothing. Only that some of the ap's are now at HA-controller (but still at .91 network).
@pieterh if the controller is found via broadcast it should found the right controller. This is because they are at the same subnet at L2. So somehow AP uses L3 adaptation and discovers it old controller. So it must be that AP stores information abou...
@ patoberli I suspect the same thing, that AP stores information of the old controller somewhere and it remember that info even after reboot. Even though the manual states that it does the broadcast on local subnet first.Unfortunaly im only admin for...
