If you want to filter your outbound LSA's you can do a "ip ospf database-filter all out" or "neighbor x.x.x.x database-filter all out" Adjacencies are still established but the other router wouldn't receive your LSA's. Sometimes this is used to reduc...
As an FYI this feature is called UDI (unique device identifier). http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801d2d6d.htmlSo you can use feature navigator to find which platforms support it.
You should be able to snmpwalk it."snmpwalk ifname"http://www.cisco.com/warp/public/477/SNMP/snmp_ifIndex40700.htmlYou can get snmpwalk from here:http://net-snmp.sourceforge.net/download.htmlThe ifIndex OID and mib can be found here if you need it:...
You said that is an old code snippet, it is possible they may have changed the console speed. You mentioned only changing the flow control setting (hardware software etc). Try changing the speed to 115200 and work your way down. The other person may ...
Make sure you are converting a 350AP, and not a bridge.When using the conversion tool, make sure your vxworks is one of these: (if you have 12.04 you must downgrade)12.03T, 12.02T1, 12.01T1, 12.00T, 11.23T, or 11.21 SNMP must be enabled.You can get t...