Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a PIX 506e (6.3(4)) and for some odd reason, the device simply stops passing traffic after 24 hrs. Once rebooted it works for another 24 hrs and then does it again.Network is as follows:Users to Hub, Hub to PIX, PIX connects to Cayman dsl ...
Is Websense the only URL-server option I can use in a PIX 515e - 6.3? I am looking at a product called Dan's Gaurdian which gives me a little bit more control and flexibility. Is this an option that can be implemented on my PIX?thanks,Jim
I would like to clear out all ARP and clean all Spanning-tree info from all switches. I have a core switch (4506) with 2950's connected with either fiber or copper. I would like to perform a rediscover of all switches and devices connected to all s...
I am working with a client who has an older PIX 520, version 4.2(5). I would like to connect using SSH. Is that possible in this version? I can set the telnet, but I would prefer to use SSH for outside connectivity.thanks,Jim
It is a simple network. No failover and/or cluster in place.The following is the sho ver output:Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 300 MHzFlash E28F640J3 @ 0x300, 8MBBIOS Flash AM29F400B @ 0xfffd8000, 32KB0: ethernet0: address is 0014.6...
I would have thought that for the first server, but after changing two other NIC cards on two other servers (all connected to the same switch, 2950) I was really beginning to wonder that maybe I have a bad ARP/MAC table(s) being spread around my swit...
An interesting note:- if I change the NIC Card in one of the servers, I am able to have services working again across all VLANS and external access to the FTP Server.This seems to lead toward a MAC address problem or some kind of layer two issue.Any ...
- speed and duplex are ok for each port (both sides)- cables are factory; I had them tested again.- cables were labeled as to the port that each server was connected; following the move cables were reinserted to the exact same port.- I have verified ...
