Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All - Can you please advise, what is the best latest ADSL firmware for cisco C887VA-K9.
At the moment, we are using.
Modem FW Version: 110628_1158-4.02L.03.A2pv6C035d.d23jModem PHY Version: A2pv6C035d.d23jVendor Version:
Thanks,Na...
Hi All, I am trying to copy IOS cat3k_caa-universalk9.SPA.03.06.06.E.152-2.E6.bin from TFTP server (windows 2008 server) or another 3850 switch (which is directly connected to the 3850 switch in which I am copying), is gets stuck after some time (sa...
Hi All, We have TWO MPLS circuits on same PE of same customer with two different vrf's X & Y but import and export RT are same. Please see below configuration and outputs. There is a route in X VRF 192.168.26.0/24 which is not being leaked on to Y vr...
Hi All, We have cisco stack switch of 3750 with 5 units it as below. Switch Ports Model SW Version SW Image------ ----- ----- ---------- ---------- 1 52 WS-C3750-48P 12.2(55)SE4 C...
Hi All,
On dual supervisor Nexus management, can it have different IP for the 2 different management ports and each mgmt port in different vrf and default gateway?
Thanks in advance,
there is only one local subnet in X VRF. There is another vrf Z of same customer and same RT's on same router, has same issue. BUt there is no such problem between Z & Y. And one more point to note, 192.168.26.0/24 route in X VRF is being announced t...
