Hi Suresh babu,Please use following process...1: Connect the cable from the AUX port of the router to the modem,2: # show line3: you get the result like as mentioned below#show line   Tty Typ    Tx/Rx    A Modem Roty AccO AccI  Uses  Noise  Overruns ...

Hi Akhil,can you pls share the root cause (if resolved) of that issue...?Thanks,KodandaRao,

Hi Joli,Assumptions:internal network: 63.36.9.0access-list 101: Applied to traffic leaving the office      (outgoing)access-list 102: Applied to traffic entering the office      (incoming)ACL 101access-list 101 permit tcp 63.36.9.0 0.0.0.255 any eq 8...

Hi Ahmed,You can use CWDM connectors as a best practice to connect DC and DR sites and you can implemet port channel between those sites over the fibre link.Pls go through below links.http://www.cisco.com/en/US/prod/collateral/modules/ps5455/ps6575/p...

Hi Kamesh,1941 SMARTnet is available in 3 different packages as mentioned below,CON-OSP-1941           ONSITE 24X7X41941 W/2 GE2CON-OSP-1941SEC    SMARTNET ONSITE 24X7X4 1941 BDL W/ SEC LICCON-OSP-1941WA     1YR SMARTNET ONSITE 24X7 4HR 1941 ROUTER W...