Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just bought an ASA5520, opened the box to upgrade the memory to 2 GB to support 8.3, and discovered that the unit only has 1 memory module connector. I thought all the ASA5520 units came with 4 slots? There are hole patterns for the other 3 slots, ...
A 2811 router recently was powered down and up, and on reboot, would only boot to ROMMON mode. We got this message during the boot cycle:"Readonly ROMMON initialized boot: cannot open "flash:" boot: cannot determine first executable file name on dev...
I got asked by a customer about handing out random UDP ports through a Cisco 831 router running DHCP and NAT. Apparently this is common in the gaming world. It is not something I have seen before. Can the customer do this with an 831? Apparently...
Shane,Smartnet or not, Cisco put non-conforming units out in the field, and has a responsibility to help you deal with that. As we can see here, some folks at Cisco are still in denial, almost 16 months since I first raised this issue. However, TAC...
Andrew, you've given that answer before, but the reality is much different. I've seen three different AS5520 units with only one DIMM slot, and several others in this thread have also seen them. Don't call the reseller, they bought these non-confor...
This is exactly the same configuration I had on two differnet ASA5520 units, without all the sockets installed. Luckily we were able to return those units to our reseller and get one that had all four sockets. The party line may be that all the 552...
Since we got a replacement unit that had all four DIMM sockets, we have not contacted TAC, and probably will not about this issue. I'd love to have the time to pursue this, but any ASA5520 units manufactured after April 1 of this year apparently do ...
