Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This really shouldn't be giving me this much trouble...This morning I started seeing hundreds of the following log entry (destination port number differs, but the rest is the same):Deny udp src outside:ns1_isp/53 dst inside:pix_ext/xxxxx by access-gr...
I am trying to authenticate to a vpn 3005 sitting on a pix 515 dmz. The 3005 is using the internal auth server (it's own), and is not using certificates.This is not a live setup so there is no edge router, and no lan connection. Just a laptop, a pi...
I'm trying to design an ACL filter on our 1720 router to prevent certain tcp ports from flowing through the router. I've written the following access-list as a test:access-list 101 deny tcp any any eq 135 logaccess-list 101 deny tcp any any eq 139 l...
Insanely basic question:1721 router with WIC-1T in WIC0. Serial (v35) connected to an external CSU/DSU then via T-1 to the internet. When applying config commands like "no ip mask-reply" to the serial interface, do I apply the command to interface ...
Upgraded from 6.3(1) to 6.3(3) and noticed my internal LAN cannot receive DNS replies from my DMZ positioned DNS server anymore.Internal = 192.168.1.0/24DMZ = 192.168.0.0/24DMZ contains DNS server & Email server. Email = 192.168.0.2 inside, a.b.c.1 ...
Everything seems to be back to normal. Your suggestion may have in fact been the case. The issue started prior to my changing anything, and silently corrected itself as well which would seem to indicate the issue was not our equipment per say.
Sorry for the delay in responding -Current configuration:!version 12.0no service padservice timestamps debug uptimeservice timestamps log uptimeservice password-encryption!memory-size iomem 25ip subnet-zerono ip finger!no ip bootp server!interface Se...
