About colsen

colsen · 10-10-2003

We have 2 sites, both PIX 501, VPN between them, and both allow inbound VPN from remote Cisco VPN client thru the Internet.When connecting, the following all work GREAT with the VPN client: Modem dial in, Wireless Internet, Earthlink DSL.However, we...

colsen · 09-24-2003

I'm aware of Websense, but is N2H2 supported?Any other products supported with the PIX for URL filtering?Thanks!

colsen · 08-15-2003

For the following setting on max hop count in BGP:P2R1(config-router)#neigh 1.1.1.1 ebgp-multihop ? <1-255> maximum hop count <cr>We are trying to limit the actual EBGP hops that our provider is creating to their loopback EBGP neighbor. We have p...

colsen · 08-15-2003

Config below. URL would be great if it uniquely defines the tag, and what it's used for.Config:router(config-route-map)#match ? as-path Match BGP AS path list clns CLNS information community Match BGP community list interface Matc...

colsen · 08-01-2003

I'm aware how to change DFM thresholds/polling for different devices. I can get notification working fine for "an email".But,Can DFM email "joe" for router failures, and "fred" for switch failures?URL to describe steps would be great!Might Cisco imp...

colsen · 07-10-2003

We have a 10 user license PIX 501I was informed that the 10 user license is only for VPN tunnels, which will suit us fine. But could you confirm that the 10 user licence WILL actually restrict a max of 10 (non-vpn) outbound connections to the intern...

colsen · 07-10-2003

THANKS for your reply. I tried it, it worked, but a new problem arose.When I typed in the above command, I got the PIX error:fgsagfsfg(config)# global (outside) 1 interfaceWarning: Start and End addresses overlap with broadcast address.outside inter...

colsen · 02-26-2003

Thanks for the answer.When will Cisco update the PIX support for Ciscoview? The last update is a year old. Any time prediction?

colsen · 02-26-2003

Thanks for the reply.We're running RME 3.4 on Win2k, sp2.The export to file confirmed the entries I typed in are correct.Key question: Can the PIX have BOTH a rw and ro community strings which are different? What is the PIX syntax for this?I could ...

colsen · 07-15-2002

The description sounds relevant.What driver version/file from Intel? I believe we have the latest.Does the CAT need a certain OS version? Is this relevent to this error?Thanks!

Member Since	‎06-26-2002 11:25 AM
Date Last Visited	‎03-09-2021 02:02 PM
Posts	30

User Statistics

User Activity

Resolving conflicts with DSL "Speed stream 5100" modem and Cisco VPN Client

Is N2H2 URL filtering product supported with the PIX?

Why doesn't the max hop count actually limit hop count in ebgp-multihop?

What is the "tag" value used for in Route-maps?

Can DFM notifiy/email different users for different device errors?

Re: How many outbound internet connections are allowed on PIX 50

Re: Does PIX 501 support PAT with same one IP address used on it

Re: When will updated PIX support be added to Ciscoview in Cisco

Re: Can a PIX have both an SNMP RO and RW Community string for C

Re: Problems with GigE connection from 2950 LAN switch to an Int