Hi all, How can I implement QOS for voice while non cisco Ip phones are connected to cat2950-EI (few pcs are alos connected) and having the server at remote place and is accesses through vpn.Thanks in advanceMS

Hi ,with the G723.1 (6.3K) codec, and no rtp compression on the ethernet(as it doesn't support)how much will be the voice packet size?Scenario:Cisco 2950(EI) with non Ip phones - fa0/1 to router e0/0- router e0/1 to ISP router(BW:512K).(call manager ...

Hi All, Shall I use "auto qos voip cisco-phone" command on 2950(with EI Image) even the IP phone is from different vendor? Also can I use "auto qos voip trust" on the switch fa0/1 , if that is the interface uplink to the router and different vendor(...

Hi all, The router at my cleint location using EIGRP routing protocol is having T1 link, but bandwidth(S0) is configured as 1544000. They will be getting soon T3 between the same locations and may want to use the existing T1 link as Backup and with ...

Hi All, We have a VoIP over VPN implemented in Hub&Spoke model. Hub has a 3640 connected directly to ISP provided router(which we do not have control-768Kbps) and one spoke is in NYC and another is in India. We are using Altagen software PBX server &...