Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to configure a time based network access restrictions to Cisco router.Is it possible to restrict a telnet access for user X to Cisco router only to 1:00PM-4:00PM using RADIUS AAA ?I have a Steel-Belted RADIUS server from Funk Software.
Is it possible to bind Dialer1 to ISDN B1 channel and Dialer2 to ISDN B2 channel on a BRI interface ?My goal is to achieve that the connection over Dialer1 uses always B1 channel and the connection over Dialer2 uses always B2 channel of a BRI interfa...
I have 1721 with ISDN. Isdn connection is ok but traffic is only 20 % successfully (20% pings are OK).If I change router to 2520 - SAME CONFIG everything is 100% OK.I tried :-no encapsulation-encapsulation ppp-encap. and authent. chapsame result.Only...
interface Serial0 ip address x.x.x.x x.x.x.x no ip directed-broadcast encapsulation ppp no ip mroute-cache dialer in-band dialer string xxxxxxxxx dialer-group 1 pulse-time 1 ppp authentication chapand ISDN TA must be in V.25Bis mode
Hello,so exactly ISDN connection is OK , sh int bri0 -up -up, sh isdn stat B1 or B2 OK, sh isdn active OK. IP connection does not works.At this moment I have temporary solution with cisco 2520 and it works only with HDLC absolutely OK.Thanx Marian
