About jins

jins · 08-03-2004

Hi,I have a PIX 515 v6.3(3) and I've vpngroup configured for the users to connect using the Cisco VPN client. Once the users are connected to the VPN, they are not able to access any subnet other than the locally connected subnet on ot the Inside int...

jins · 01-19-2004

Hi All,I am looking at options of running IP telephony infrastructure on a MPLS circuit. Does it support G.729 codec ? What all are the considerations I should have while designing this.ThanksJins

jins · 11-24-2003

Hi AllIs there a VPN Client software for Windows 2003 OS ? I tried with the 3.6.4(A), but got an intialization error while trying to start the program. Is there a compatable version?ThanksJins

jins · 07-19-2003

Hi All,I'm trying to configure a IPSec Tunnel Between Windows 2000 & PIX 6.3 since last week. Am following cisco document http://www.cisco.com/warp/public/707/2000.html#tpix and it just doesn't work. On the PIX debug crypto isakmp doesn't return anyt...

jins · 04-17-2003

Hi All,I'm not able to get the most recent reports from the CDR Analysing & Reporting tool. It's throwing me an error saying "The data is available only till 27th Jan 2003. "In the available reports I'm seeing one 'Available Report' whaich was mad o...

jins · 08-04-2004

Try this... no isakmp key address netmask no-xauth no-config-modeisakmp key address netmask no-xauth no-config-mode-jins

jins · 08-04-2004

Hi Rick,All the routes were perfect. Infact, I got a incidental workaround and am banging my head on to PIX as I cannot understand the logic behind this. I was able to ping the VPNed client from all the internal subnets all the time.The workaround : ...

jins · 12-11-2003

Yes Bruce,I was able to install that on a Windows 2003 Server - Standard machine. But none of the packets seems to be taking the secured path. It shows the secured networks in the statistics window. The Installation file I used was "vpnclient-win-msi...

jins · 11-24-2003

Thank you very much. Will check and let you know.Jins

jins · 08-11-2003

As there is no static NAT for the IP 10.17.100.1, one of the possibility could be the NAT 0, since there is a route on the PIX for that subnet. Pl. check if you have NAT 0 configured on the PIX for the subnet containing IP 10.17.100.1. But I don't th...

Member Since	‎07-02-2002 09:24 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	37
Total Helpful Votes Received	3

User Statistics

User Activity

Access to LAN Subnets using Cisco VPN

Voice Over MPLS

Is there a VPN Client for Windows 2003

IPSec Tunnel Between Windows 2000 & PIX 6.3

CDR Reporting Issue

Re: Changing ISAKMP keys

Re: Access to LAN Subnets using Cisco VPN

Re: Is there a VPN Client for Windows 2003

Re: Is there a VPN Client for Windows 2003

Re: ICMP from the outside