Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I know there is a option that you can check to disable the LAN-LAN tunnel in the Browser when configuring the VPN concentrator 3030. But is this option availiable in the CLI or menu driven on the VPN concentrator. I want to connect to the box and tur...
Problem: The routers async lines do not exhibit the default behaviour of <CR><LF> as described in the Cisco documentation. However, executing a TELNET TRANSPARENTcommand will force a <CR><NULL>.(which is fine) How do you confgure the async lines to ...
I have two PIX 520 units in a failover configuration. While looking at some issues, it has been noticed that they are actually different hardware as per the below config:Primary - PIX 520, 233Mhz, 128Mb RAM, 16Mb FlashSecondary - PIX 520, 350Mhz, 12...
I have a 2950 running IOS 12.1.13(EA1) with the following config.I have a tacacs+ server setup for authentication for the switch. When I telnet into the switch, it prompts me for username and password which works fine. When i add the authentication f...
we have a Pix 515 running ver 6.2 and currently have problems configuring the vpn client on window XP professional to work with the PIX, any suggestions or link ? It keeps reporting it cannot contact the other side. I know PPTP works but not sure abo...
