Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a customer that has DID ranges that are not contiguous. Lets assume my area code it 999. I assumed using 999XXXXXXX would work but read another post claiming it would not. What is the best way to set up outbound caller-id in this scenario so t...
working on an issue for a customer and I cant find good documentation on this anywhere for multiple ring-groupshave 2 routers, each with 2 ring groups connected on a mau terminating multiple serial connections (wan, hence the rsrb) and utilizing rsrb...
just moved off of VTAMI have a 7206 with CIP and run 12.2/27.135 t1s feeding this from 5 locations.Can this be a CIP issue? I had no issues until moved to the CIP (CIP is configured as 3745)The weird thing is I have 5 t1s and each site can use the ot...
Have you taken in to account Voicemail usage? Are you planning on one Message system for both Callmanager and the Option 81C, or both using their own seperate voice messaging system? Here are the settings required on your PBXhttp://www.cisco.com/en/U...
Also, verify your exec timeout on your VTY config is not set to 0 0 or extended times. If this is set, make sure you actually exit the telnet session and do not just kill your terminal session.(0 0 = hours minutes)
target mac addresses and mac addresses in DLSW are always sent non-canonical. DLSW always uses non-canonical.The show commands will always remain non-canonical as well, so don't let that alarm you. You can use the 000.1111.0000 or whatever you want t...
Remember some basic legacy rules1) only one entry path into the DLSW network without DLSW redundancy. The fact you are blackholing everything indicates you are breaking this rule. The remote traffic MAC address gets cached as local by the switch from...
Create a peer statement to the main HQ on the remote sites. Then create a backup peer with a linger statement to prevent a link flap wreaking havoc on the remote sides.E.G.HQ loopback/peer address address 1.1.1.1Regional site loopback/peer address 2....
