You will need to provide the platform, code and supervisor (if applicable) to get a proper answer to this..Both voice and data VMPS will work pending the above.
It is Best to reseat the module as soon as possible...Reseating the module it is talking about 'if' it is only referring to one module should be fine..however, if more than one module is being reported then you will need to reseat _all_ module includ...
Hi,Unless you have remote access to the console port (ie. through modem connection/termserver) you will have to console into the switch and configure a telnet password in order to connect.Documented here:http://www.cisco.com/univercd/cc/td/doc/produc...
Hi,Please include the configuration for both the server interface and the client interface (assuming that the hub is connected to the same port as the client) when it is directly connected to the switch...Do you have 'spanning-tree portfast' configur...
Hi,This is really not enough information to go on.What are the physical locations of users relative to the 4003?distances...buildings...rooms...If they are relatively close, the 4003 with a couple 48 port modules will do..or you could add a couple of...