Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI recently carried out some sniffing on a 3550 and noticed a lot of traffic that I should not have seen on that port. Having had a look around on cco this appears to be a known issue (unicast flooding) I am a little confused as to exactly what ...
PIX515E with 128MB RAM & 16MB FlashI have just tried to upgrade my Pix515E from 6.35 to 7.21-9 in monitor mode. I am able to connect to the tftp server and upload the new image, once the upload is complete my pix just cycles through re-booting and t...
HelloI have a Pix 525, Is it possible to have two different Gobal address's statically nating to one local address? i.e:static (inside,outside) 192.168.0.1 10.1.1.1 netmask 255.255.255.255static (inside,outside) 192.168.0.2 10.1.1.1 netmask 255.255.2...
We have a 3640 with an NM-30DM and a NM-1CE1USince the router recently lost power unexpectedly many of our users when trying to dial the router using an analogue modem are unable to establish a connection and receive the following message:Error 619 s...
HelloI have a Pix525 configured with several DMZ's, in one of the DMZ's I have a citrix secure Gateway farm which is available to the outside world on port 443, this works fine, however if a remote client remains idle for approx 10 minutes the sessio...
Thanks for the reply Leo, I've done as you said and below is the output from one of my modems. Any Ideas as to what I should be looking for?I should also point out that some analogue callers can connect some of the time which would indicate that som...
