Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Are any rules on configuring a switch (L2 or L3) that will be used to create a DMZ. Setting off the telnet config to the router is one thing I did also the necessary passwords. But are there any other configs to "harden" the switch.Thanks for the hel...
Hi,I am having a strange phenomenom with my 4506 switch : Sup. eng. II (X4013)with 3 x X4148-RJ. We have a novell network and I plug in the pc in one of the three modules starting from 1 until 32, I have no problem to login into the network (very fas...
I have a AP 350 series connected to a 826 ADSL router. I have no problem what so ever with my internetconnection because I used the same setup with a cable connected to the 826 and I didn't had the problem.My problem is that after 50 minutes or so my...
I am doing a migration of all our ADSL routers (non-cisco) to 827 Cisco router. Until now I had no problem at all. But with one I have a routing problem :This is my config :Cisco827#sh runBuilding configuration...Current configuration : 1199 bytes!ve...
If I try to connect a 2950SX-24 with a MT-RJ connector, via a MT-RJ/SC cable, to 3524XL with a 1000base-X GBIC. It failed to make a connection. I don't see the led's going to amber or green. I tried many cables and a second 2950SX but with the same ...
Sorry for the late reaction.But the solution was to replace the SUP II engine (HW ver 5.1). I had a 5.0 version and that gave problems on the 4506.The strange thing is that I inserted into a 4503 that I have and there I don't find any errors. Maybe i...
I have a full novell network with IPX running. I don't need to install portfast on my ports of my switches , I have several 4506,4503,2924,3524,2950 switches.And I don't have multiple VLAN's. But multiple sites/subnets.If you have problems with findi...
Hi, thanks for the reply.I did your suggestion and I have a speed record of 0,3MB/min. I have put the speed fixed on a port that worked and on a port that doesn't work but I doesn't make any difference.So it has nothing to do with IPX , I have the sa...
