Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI have an encrypted GRE tunnel from a remote office to our data centre. I am using ADSL for the remote office connectivity and occasionally the line gets congested on the upstream. I am also using the ADSL line in the remote office to access the...
Hello Does anyone know if is possible to get a Compaq t1010 thin client running with a 350 aironet card and authentication to the AP using LEAP ?Many thanks
HelloI have a hub IOS router with CBAC enabled and ipsec tunnels coming in from spoke LANs over the internet.The only way I have been able to get this working correctly is to allow the spoke private address ranges through the outside interface inboun...
Aironet Safety ConsiderationsHelloI am looking into the installation of a wireless network in one of our warehouses. Where wireless appears to be the ideal solution for our requirements I have a question regarding the safety implications that arise ....
HelloI have a PIX to PIX VPN between my hub pix and a remote spoke.The connectivity on this link through the vpn is very unstable and if i ping through the tunnel to a device on the remote network, icmp packets are dropped on a regular basis. If howe...
Thanks very much guys.I am aware of the 'sysopt permit ipsec' command on the PIX, but of course there is no such command on the ios router.It's reassuring to hear that I am configuring the thing correctly although it seems a bit weird that that the a...
Thanks for the reply.The users on the inside of the router will be on a private address space, say 10.1.0.0. / 16The router will need to provide NAT to a couple of internal machines, 10.1.0.10 & 10.1.0.11/ 16 for PROXY and EMAIL access. All other tr...
Thanks very much for your help,I find it a little strange that cisco don't produce performance information such as this as standard documentation for their products.Thanks again.Martin