Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, we have a Cisco Catalyst 9800-L WLC that we would like to configure WPA2+WPA3 transition mode on for the WLANs. We have some WLANs that are meant for both APs that support WPA2 and WPA3 (For example AIR-AP2802E-K-K9), as well as APs that only sup...
Hi,
I would like to check what could be causing a stacked switch to crash/hang and needs restarting frequently. This started after we upgraded our stack of WS-C2960X-24TS-L from 152-7.E4 to 15.2(7)E9, and this still occurs after I've replaced the swi...
I don't have access to the WLC currently, but this is what I am trying to achieve:
I would like to know if this could be applied for a WLAN that is broadcasting on both AIR-AP2802E-K-K9 and AIR-CAP2702E-C-K9?
Hi @Saikat Nandy , I think you misunderstood what I was asking.
Let's say I have a WLAN that I am currently broadcasting on both AIR-AP2802E-K-K9 and AIR-CAP2702E-C-K9, and it is currently on WPA2. Is it possible to set that WLAN to WPA2+WPA3 transti...
I have one of the requested logs currently, as the switch is deployed at a customer site.
MY_TMIM_Interconnect#dirDirectory of flash:/
2 -rwx 26786816 Jul 13 2000 12:41:39 +08:00 c2960x-universalk9-mz.152-7.E10.bin647 drwx 512 Jul 13 2000 12:25:44 ...
