Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We are running CCM 4.2(1) and all outbound calls fail over PRI. We have a few DID's and incoming calls are successful. The gateway is a 2821 with MGCP. The Telco did put a analyzer on their switch and the returned messaged is indicating that th...
Hello,I am running CCM 4.04,Unity 4.0 with a Cisco 2600 as a voice-gateway with a VIV-2FXO.Outgoing calls work perfectly.The Auto-Attendant greeting is being played on Inbound/External calls via PSTN. I believe this is coming from CCM as when I disco...
Hi,I have a Pix506e running 6.3 that is connected using PPOE to my DSL provider. Everything is working fine for internet traffic and for traffic coming back in to access FTP and mail servers. Is it possible to configure a VPN tunnel using IPSec to te...
Jon,Thanks for the quick reply. In this case its web services with SSL certificate, so TCP port 443 is what I would be using for port forwarding, but it wont work as I know you can't map the same public IP to more than 1 private IP using the same po...
All inbound and outbound calls are working perfectly as it turned out, it was a telco issue with translation on the telco DMS-100. So to sum this up, it was never a CCM or 2821 gateway issue.Thanks for all that help and provided their advice. Blue Sk...
