About btarno782

btarno782 · 02-21-2020

Is this bug really fixed in 6.1.4 because I'm seeing something very similar in this version. The fix is to remove the RT being imported from the VRF, and then re adding it. This was also the fix in this bug originally. So the symptoms are very sim...

btarno782 · 01-07-2021

Hello narvenka, Thanks for writing this article, it's very helpful. I didn't have any issues creating the GISO, that script works great, however I'm not able to run the create_usb_script. I get a syntax error that I'm not sure how to resolve:./cre...

btarno782 · 01-12-2018

I'm having the same issue, but in my case I know the cabling is in place because the interfaces are connected directly to each other. This is in a lab where I'm trying to verify the functionality of these optics. The interface is sending and receiv...

btarno782 · 01-30-2015

Nicolas, Thanks for the feedback, I appreciate it. Looks like what was missing was the enabling of the ipv4 flowspec address-family under the actual vrf. I had the vpnv4 flowspec address-family enabled but that wasn't correct. So the working config...

btarno782 · 01-29-2015

Hi Nicolas,That is what it looks like isn't it? That's something that I tried before my last post. It doesn't seem to make a difference though: !!!!!!!!!!!! on the client:router bgp 200 neighbor 10.1.1.20 use neighbor-group RRR!router bgp 200 neig...

btarno782 · 01-29-2015

I thought that this was the only way to enable flowspec on an interface: RP/0/RSP0/CPU0:9006-3-LAB#show run flowspecflowspec vrf BLA01 address-family ipv4 local-install interface-all ! !! Is there a different way? To expand on the flowspec specif...

Member Since	‎01-29-2015 12:21 PM
Date Last Visited	‎01-11-2021 10:04 AM
Posts	3

User Statistics

User Activity

CSCuy72505 - Route is not getting advertise in IPv4/IPv6

Re: NCS5500 GISO Boot via USB

DWDM-SFP10G-C on ASR-9006 with 24x10G

Nicolas, Thanks for the

Hi Nicolas,That is what it

I thought that this was the