Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
1. Client has two (2) tier Content Routing network architecture:Client<->Tier_2_CE <-> Tier_1_CE <-> Origin_Server_012. Client does not have EXPLICIT PROXY configured on browser pointing to Tier_2_CE3. Network uses Content Routing to redirect client ...
A client is considering integrating a Cisco Unity host into their mgmt framework. This will involve installed Concord's SysEdge SNMP agent (4.1 patch level 4).Where can one obtain a list of third party vendor certifications for Cisco Unity (i.e. what...
An IPinIP tunnel is implemented across two catalyst switches as follows: 1. Cat4500_VLAN400 <==> IPinIP <==> Cat3500_VLAN400 2. OSPFv2 across tunnel interface The following behavior is observed: 3. Failure to complete FULL OSPF adjacency 3.1 Cat3500 ...
What are the exact cable specifications and pin-outs required to inter-connect CCM to an Octel 350VM server using SMDI via the VG248 Analog Gateway. The SMDI Integration link 'originates' from the Async port of the VG248 and 'terminates' at a DB25 ma...
Thanks Mary,It appears as if the configurations that are outlined on that page either (1) assume that the subscriber / client has EXPLICITLY configured a proxy server in their browser that points to their Tier-2/edge CE farm or (2) the access infrast...
