Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,I implemented MACsec von two C9200 Switches like this on both sides:interface TenGigabitEthernet1/1/1description Uplink to C9200switchport trunk allowed vlan 10,11,12switchport mode trunkmacsec network-linkmka policy mkapolicymka pre-shared-...
Hello Group-Members,it's really strange but since setting up new access-lists (I never used them before) I noted that the lists stops working after 24h after applying it on the interface. This happens on a C9200L with IOS XE 17.3.7 (and on an elder C...
After applying an upgrade to current version 17.06.05 on our two C9800-L-F-K9 devices (not in HA), one device won't boot anymore... LEDs are off. Powercycling let the onboard LEDs light up, but switching off after a few seconds, fans keep running on ...
Thank you for all your replies.I think the problem was linked to DHCP and the lease time of 24h. I found in log file that the server asked after 12h for a new lease, but didn't get an answer, due to the restrictions. After 24h the dhcp-address expire...
We got a new branch office, outside of our main building. The branch is connected with a dark fiber and no isb or public wan. Normaly I'll use IPsec on our firewall, but in this case I wondering if extending the vlans over the sfp-ports would be a so...
