No, i can't make any calls from this line, its just a test line. It has signal tho. All i needed to do is press 0 or any other number and get a dial-tone from this test line from analogic and ip phones i have set. I can't make it work.
... View more
Hello there! I'm testing a cme and everything works fine. FXS works great and i can do all internal calls without any problem. Now i have this issue: i got a external line with no function besides gives me a dial-tone (when i plug this line into a analogic phone i can hear the dial-tone). I dont know if its a simple pbx line or a sdh line, but the fact is, this dial line doesnt make any call, its just a dial tone line to test the fxo vic. So, what i have to do is press 0 (or any other number) on the ip phones and analogic phones to get a dial tone from the fxo vic like i was making an pstn call. I'm reading for 2 days and made all the changes it would supose to work and nothing works. My phones can't get any dial-tone from the fxo vic. It's a very basic configuration just to test if its everything ok with the equipment and this is my last test and i dont understand why its not working. Thats what i have: C2911-CME-SRST/K9 with VIC2-4FXO Four-port Voice Interface Card - FXO (Universal) WS-C2960-24PC-L IOS 15.0(1r)M12 CME 8.6 Any ideas how to make it work? I tryed the prefix but didnt help at all. I really dont know if its my configuration problem or if it is this dial-test-line i supose to plug in and test. For my fxo configuration i did: voice-port 0/1/0 supervisory disconnect dualtone mid-call cptone BR timeouts interdigit 2 timeouts call-disconnect 1 timeouts wait-release 1 connection plar 1004 caller-id enable And aplyed this dial-peer on the voice-port: dial-peer voice 6 pots destination-pattern ........ port 0/1/0 forward-digits 8 Thanks and sorry about my english, not my main language... =)
... View more