Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
A case:A: enterprise PIX<---->B: office PIX <------> C: a remote PIX,they will becoming a VPN networks.A PIX become a eZVPN server for B PIX that is a eZVPN client ,and B PIX is a eZVPN server for C PIX at one time. If the case can do it?Thanks!
Hello : I have tow pix,one is pix-515,the other is pix-515E,first bios is 4.2 and 515E is 4.3,I find 515 booting is showed "CISCO SYSTEMS PIX FIREWALLEmbedded BIOS Version 4.2" ,and 515E booting is showed"CISCO SYSTEMS PIX FIREWALLEmbedded BIOS Vers...
I found that i only select the same type GBIC for multi GEIP+ by cisco dynamic config tool,if it tell me,7500 support one type GBIC with multi GEIP+ at the same time?
hi:Thank you first.For example i have tow pix-515e-ur-bun units,if i can configure them run with A/A mode?Because i dont find any document about this mode,i know following mode only,A/A mode require : two same model pix,one is UR license,the other wi...
Hello: So,my router show a error "slot 0 eeprom failed" when system boot,and i search some info on cisco site,i finded a command "test aim eeprom",then i try this command,but no this command,and i find a command "test pas eeprom",try it but ....:( ...
Thanks first.Question is this,i developed a nes MIB for my application,so i want to insert the MIB to cisco device, How to do i ? Has cisco a command to do that?Rgds.
