Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I received a cache engine 590 running 5.1.5 and bios 3.0c. I dont have the admin password. How can I reset the password.When rebooting I did not even see the option to enter the boot flag.I refered this web sitehttp://www.cisco.com/en/US/partner/p...
Hi,I have multiple spoke routers with FR to the service provider and on the hub side I am using IMA( atm multiplexing), and isdn as the backup for all these.On both sides of the networks I have voice data coming on vlan 2, which is configured as sup...
Hi,I have PIX 535 running 6.2(2) with 8 interfaces. The ip at the inside is 172.20.10.0/24 and one of the dmz-corporate is 172.20.30.0/24.And the PIX interface in the respective networks have ip *.*.*.1.I can ping from any host or device from these n...
Hi,I have pix 535 with 6.2(2). I have the inside with address as 172.20.10.0/24, with 172.20.10.1 as the pix interface. One of the DMZ's that is DMZ-corporate, with network 172.20.30.0/24, and 172.20.30.1 as the pix interface address.I have configure...
Hi ,I have installed CTM 3.0.1 on solaris 8. Was able to bring up the client with no problem. Now I try to add the NE with the NE ID that was configured on the device and the ip adrress with the community string also.The model selected was 15200.I ge...
Hi Don,I think I got it. this is what I have on the FR side, I applied the service-policy on the map-class command for FR.that is .class-map match-all voice match access-group 105!!policy-map voip class voice priority 48 class class-default f...
Hi Don,Thanks, that gives me a good idea. but I am not able to apply the service-policy to the sub interfaces. I am getting error that it cannot be applied to the sub interfaceThis is what I didclass-map match-all voice match access-group 105!!polic...
Hi Nairi,Thanks for the info.One clarification, so to communicate from a higher security to a lower security interface you require NAT. And for Communicating from lower security to higher security interface you require some sort of translation. This ...
Hi, The best place to see what all you can do with the various products you have is the following linkhttp://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/index.htmPlease look for the overview of each of the products you are intrested mostl...
