About mark.vicuna

mark.vicuna · 05-22-2003

Hi All,I am running a ACS 3.1(1)27 server. This post is regarding the advisory (watch wrap):http://www.cisco.com/warp/public/707/cisco-sa-20030423-ACS.shtmlIs there a requirement for the 3DES patch? If so, on what basis in relation to this advisory...

mark.vicuna · 12-25-2002

Hi All,I'm currently using nbar for protocol discovery on a network runningrip. I've noticed that nbar will only discover rip packets inbound on aninterface. The interface(s) used do not have passive interfaceset for rip or an access list denying u...

mark.vicuna · 12-31-2002

NBAR checks outbound and inbound - there are 2 columns per protocol/port [inbound and outbound]- otherwise there is no use for NBAR to work with QOS if it only does half it's job.I can see other types of traffic on both inbound and outbound.

mark.vicuna · 12-25-2002

if you are talking about the egress point of a router (and in-to-out translation), classification is done first.

mark.vicuna · 12-25-2002

there is a good document for nat order of operation - the order of which translation is done is not always as assumed! :-)http://www.cisco.com/warp/public/556/5.html

mark.vicuna · 12-25-2002

i would rather have 1 entry for the 192.168.22.0 network with 1 distribute list to filter out the connected segment rather than have x entries for those segments i want to explicitly include (and implicitly exclude the connected segment) in eigrp.dis...

mark.vicuna · 08-24-2002

Anyone know the min boot rom revision to support 16mb flash? Or specifically, will boot rom revision 10.2(5) support 16/16 memory?

Member Since	‎08-24-2002 06:10 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7

User Statistics

User Activity

ACS 3.1 3DES Patch (Advisory)

nbar protocol discovery output and rip

Re: nbar protocol discovery output and rip

Re: QoS and NAT

Re: IP NAT inside and outside traffic

Re: Stop EIGRP from distributing a connected network

Re: Cisco 2500 8meg to 16meg upgrade error