We are attempting to implement an OC-3 SONET Ring connexion (site-to-site) using a WS-X6408A module, but are experiencing time-outs when remote users are working in particular applications. We have had Verizon do thorough tests on the SONET ...
Very soon I shall have a site set-up with VOIP. Two 3550 switches will handle user-ports through which passes both voice IP packets and data IP packets. Each user-port will be a "trunk" handling voice packets belonging to one VLAN an...
In my shop, the AS5300 is used both for dial-in and for dial-out. Various people here in I.T. have the Cisco-provided free software which they use on their workstations, via our intranet, to dial out using the AS5300's async modems as ...
I can establish remote access to my as5300 via analog, isdn or using my cell phone as a modem(analog mode) without any problems.Cell phones with the 1x(cdma) chip provides connectivity via data packet.Does the AS5300 support this technology?If yes, ...
Yes, we are using a GBIC port on a WS-X6408A module in a CAT 6509 switch. This is GE over SONET. The piece of equipment "in between" is a Cisco ONS15454 MUX which is the property of Verizon, the SONET provider.
Minimally --- when we test this during the evening after 8:00 PM, there are no more than 10-12 users still working. If this were indeed a "speed mismatch," how would one overcome this?
