I am trying to upgrade from 6.1.4 to 6.2.2 and getting the following error message:Address or name of remote host [192.168.0.5]? 192.168.0.4Source file name [s]? d:\netapps\cisco\pix506e\pix622.bincopying tftp://192.168.0.4/d:\netapps\cisco\pix506e\p...
I am in the process of upgrading my PIX from 6.1 to 6.3. I would like to know of any issues or problems I may run into when doing the upgrade? Any thoughts would be appreciated.One more thing. Since I dont have a contract with Cisco, I want to get...
This is a very basic question, but this is my first time setting up a VPN and do not know where to start.Can someone tell me what is the best way to go about setting up a VPN. I have a PIX 506E, my internal network consists of two W2K servers and a ...
I setup my PIX to let pcanywhere come in to a certain machine, but it is not working. The following is my config: PIX Version 6.1(4) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password **moderator edit** encrypted p...
I setup this PIX last week, tested it and worked fine. Now, when I plug it in everything on my internal network works fine. PIX is setup for dhcp, ok. When trying to access the internet, nothing. I looked at the lights on the PIX (LINK is green, ...
I kind of ran into the same problem not to long ago. I still manage to use the same IP address (outside).For your static command try using port redirection, I hope this helps.static (inside,outside) tcp 172.18.124.99 telnet 10.1.1.6 telnet netmask 2...
I've tried "clear xlate", but it does not do anything.Last night I changed the config, I am now using one IP for the 3 connections (port redirection). It worked for me last night just fine, I tried it a few times, then this morning my boss call me s...
My config now looks like this. I am able to get pcAnywhere to work on two machine, but there is one that can not even go out on the internet anymore (216.73.164.234 --> 192.168.0.2), the only way I can get it to work is by removing static entry or gi...
Tom,Actually my outside IP is 216.xxx.xxx.234.... and the IP iam trying to use for pcAnywhere is 216.xxx.xxx.235. I entered the wrong numbers when editing my config.But, I am still having this problem. Are the above IP's okay to use in my config o...
