We have a issue with Cisco prime that the context config is not saved in the running config, just the startup config.   Do anyone have  the same problem? In startup config it is saved, but not running config. ... View more

We have a strange error who occurs when the traffic increases on the network. Every sunday we have a larger server backup job, where the  traffic increases. Everytime the port-channel goes down for just a secound. Have anyone seen that before?   This is the log message;  21:37:54 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel3: first operational port changed from Ethernet1/54/1 to none 21:37:54 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel3: Ethernet1/54/1 is down 21:37:54 %ETHPORT-5-IF_DOWN_PORT_CHANNEL_MEMBERS_DOWN: Interface port-channel3 is down (No operational members) 21:37:54 %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet1/54/1 is down (Link failure) 21:37:54 %ETHPORT-5-IF_DOWN_PORT_CHANNEL_MEMBERS_DOWN: Interface port-channel3 is down (No operational members) 21:37:56 %ETHPORT-5-SPEED: Interface Ethernet1/54/1, operational speed changed to 1 Gbps 21:37:56 %ETHPORT-5-IF_DUPLEX: Interface Ethernet1/54/1, operational duplex mode changed to Full 21:37:56 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface Ethernet1/54/1, operational Receive Flow Control state changed to off 21:37:56 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface Ethernet1/54/1, operational Transmit Flow Control state changed to off 21:37:56 %ETHPORT-5-SPEED: Interface port-channel3, operational speed changed to 1 Gbps 21:37:56 %ETHPORT-5-IF_DUPLEX: Interface port-channel3, operational duplex mode changed to Full 21:37:56 %ETHPORT-5-IF_RX_FLOW_CONTROL: Interface port-channel3, operational Receive Flow Control state changed to off 21:37:56 %ETHPORT-5-IF_TX_FLOW_CONTROL: Interface port-channel3, operational Transmit Flow Control state changed to off 21:38:02 %ETH_PORT_CHANNEL-5-PORT_UP: port-channel3: Ethernet1/54/1 is up 21:38:02 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel3: first operational port changed from none to Ethernet1/54/1 21:38:02 %ETHPORT-5-IF_UP: Interface Ethernet1/54/1 is up in mode trunk 21:38:02 %ETHPORT-5-IF_UP: Interface port-channel3 is up in mode trunk 22:32:58 %USER-2-SYSTEM_MSG: can't dlsym ssnmgr_need_to_buffer_command: please link this binary with ssnmgr.so! - snmpmib_proc     ... View more

Does anyone know what wnweb_store files does, and if there is a issue to Upgrade the IOS on a SW who has this files in flash?     ... View more