About echappell

echappell · 09-08-2002

I was having a lot of problems with Fax Relay enabled. Faxes and modems have improved since I upgrading the vg248s (1.1.2), changed the 6608 load(D004030145S1), and disabed fax relay everywhere. I still have a few "fax/modems" attached to NT serve...

echappell · 10-31-2002

I have a simular issue with 3.1.4. TAC wants me to get traces as well as upgrade to 3.1.5. I'll be doing the upgrade this weekend.

echappell · 10-04-2002

I'm thinking you should save your money. This forum is for IP Telephony questions.

echappell · 09-24-2002

I think you can prepend a 9 to the calling party information with a Translation Pattern. If your using a four digit dial plan create a XXXX translation pattern and put it in the GATEWAY'S calling search space. Make the change in the Calling Party ...

echappell · 09-24-2002

I haven't set this up before, but I imagine you need a dial-peer defined for the fxs to make calls in h323 mode. I usually have a dial-peer with the destination-pattern of 9 pointing to the voice port that is connect to the PSTN.

echappell · 09-12-2002

Do you have Unity?I've used Unity to not only play a message before transfering the call but also as a way to do time of day call routing. Basically you have the call go to a CTI port or phone that is forwarded to a Unity Call Handler. After the Gr...

Member Since	‎09-08-2002 07:07 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	13
Total Helpful Votes Received	20

User Statistics

User Activity

Fax Relay or Pass-Through???

Re: Port Locks UP Unity 3.13 TSP6.02b

Re: NETWORK

Re: Dial softbutton in missed calls menu issue

Re: MGCP Fallback Mode in IOS 12.2(11)T- FXS Dial Tone Problem

Re: message before getting to the switchboard