Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,anybody tested the ciscotsp from CM4.0 together with outlook 2003(SP1)?We cannot select the cisco tsp in the telephony provider settings.Outlook XP and 2000 works.Regards-Alex
Hi,hsrp would only help with the traffic FROM the downstreams VLANs to the transit provider not from traffic coming from the internet towards the downstream vlans.-Alex
Hi,we have two transit providers and I'm doing load balancing based on bgp. (prepending, communities, etc.) I want to receive traffic from transit provider B on the catalyst B.For redundancy reasons Catalyst B has directly connected networks for ever...
Sure.I've two catalyst 6500 which have 802.1q trunks to downstream layer 2 switches. Upstream the catalyst 6500 switches are connected to transit service providers.For every downstream configured vlan the cat6500 are doing hsrp.What I want:Both cats ...
Hi,thank you very much for the fast answer.So the following config would work:interface fastethernet0/0ip vrf forwarding vrf.something.atip address 10.0.0.1 255.255.255.0snmp-server community public RO 50access-list 50 permit 10.0.0.2 0.0.0.0The snmp...
Hi,we had the same problem and opened a TAC case. It was a software problem. (I don't have the bugid right now).We upgraded to the latest version and the problem disappeared. (now 2 months ago)RegardsAlex
