Ray,The problem you describe sounds as if WINS (browsing the network) and DNS are not configured properly. Please check the user group you are in on the 3015. The context is: Configuration | User Management | Groups. Looking at your group's gener...

Believe that you have not set up your WINS and DNS servers on the 3005 concentrator. The context on the concentrator is: Configuration | User Management | Groups. You should simply need to configure the General and IPSEC tabs.

Siddhartha,Assuming your remote users are using the Cisco VPN Client, you could potentially build a split-tunnel VPN group and build a split tunneling network list, which can be 32-bit specific. In this manner, the only traffic that will transit you...

The previous post was entirely correct in that you need to have port 500 open for IKE/ISAKMP exchange. Recommend that you also open protocols 50 and 51 for ESP and AH. Having opened these protocols and ports, you'll need to configure your 506 to al...

Hi Phil,You'll need to open UDP port 500 for ISAKMP exchange, and will probably also need to open protocols 50 and 51 for ESP and AH, respectively, depending upon your configuration. In answer to your question, the ISAKMP exchange does not appear to...