Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Would like to set up aaa authorization on a PIX v. 6.0(1) for FTP and secure Telnet on TCP port 992. Will the users need to go thru any special steps or use another app (HTTP client?) for the authorization to take place, or can they use their FTP an...
Just checking on this command:object-group service grp_id {tcp | udp | tcp-udp}and the description of tcp-udp Specifies that service group can be used for TCP and UDP. Is there a way to use this or some other combination to add UDP and TCP ports to t...
To deny icmp to the outside interface you will need to do the following:icmp deny any outside the access-lists and conduits will take care of the hosts that traverse thru the firewall, but not the interfaces themselves. Hope this helps.
Try the "no logging" command and the number of the syslog message. A link to the messages for 6.2 is below. Note that it varies per IOS version.http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_system_message_guide_chapter09186a00800eca3...
