About marshall.kahn

marshall.kahn · 10-30-2002

I have several unused 24 port 10/100 ethernet cards in a 5500 chassis. Will these cards work in a 6500 chassis?

marshall.kahn · 10-08-2002

I have a 6509 with two supervisor engines each with a MSFC. The documentation states that the boot image and the configuration will automatically be synchronized. The boot image did synchronize as advertised for the supervisor module. However the con...

marshall.kahn · 10-30-2002

Yes, but you could enable fast etherchannel on the redundant links thereby increasing your throughput.

marshall.kahn · 10-10-2002

I did force a switchover and the config did move to the redundant supervisor, but when I do show config 2 there is no config. I guess it does work but there is no way to confirm the config on the redundant supervisor unless there is a switchover.

marshall.kahn · 10-09-2002

I have the supervisor running high availability and the MSFC running SRM. The MSFC modules are synchronized (bootflash: and configs). I accomplished using a tftp server and then enabling SRM redundancy. However on the supervisor modules the bootflas...

marshall.kahn · 10-08-2002

I understand what's happening on the MSFC modules. I am not running HSRP. I will be running SRM which will sync the images but not the configs?As for the supervisors the congfig SHOULD sync automatically but has not. I'm running IOS on the MSFC and t...

Member Since	‎10-08-2002 06:26 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

5500 line cards

6509 & MSFC Redundancy

Re: stp on trunk

Re: 6509 & MSFC Redundancy

Re: 6509 & MSFC Redundancy

Re: 6509 & MSFC Redundancy