About Nqabeni

Nqabeni · 08-15-2018

Good day All, I have a cisco 2960 X with two vlans, vlan 1 and vlan 2 users from different department connected on separate vlans. I have an ADSL router on port 23. Problem: I can't seem to route my users to the internet. Any suggestions on best...

Nqabeni · 08-15-2018

Good day all, I have a cisco 2960 X with two vlans, vlan 1 and vlan 2. I have an ADSL router on port 23 (router ip 192.168.1.254) interface Vlan1 ip address 192.168.1.251 255.255.255.0 ip helper-address 192.168.1.1 interface Vlan2 ip address 192.1...

Nqabeni · 08-16-2018

Hi Georg, we changed the router from 192.168.1.0/24 to 10.81.0.x. when it was installed.So 10.81.0.1 is the router's internal IP address. The router's external IP to ISP is 168.x.x x

Nqabeni · 08-16-2018

Hi George, 10.81.0.1 is defined on the ADSL router. I can ping it successfully from the switch.

Nqabeni · 08-16-2018

Thank you for your response and insight George. I have attached the full config of the switch.

Nqabeni · 08-16-2018

Hi Selvakumar, I set configs as follows: ip default gateway 192.168.1.1 [vlan 1] ip route 0.0.0.0 0.0.0.0.0 10.81.0.1 [router ip] But I am stilling struggling to to avail vlan 2 to internet access, I will update once I have resolved this.

Nqabeni · 08-15-2018

Hi Nazimkha, I tried that and it didnt work.

Member Since	‎11-05-2017 02:59 AM
Date Last Visited	‎08-24-2018 02:02 AM
Posts	8

User Statistics

User Activity

Cisco 2960 x Routing VLANs to Internet

Routing VLANs to Internet Cisco 2960 X

Re: Cisco 2960 x Routing VLANs to Internet

Re: Cisco 2960 x Routing VLANs to Internet

Re: Cisco 2960 x Routing VLANs to Internet

Re: Cisco 2960 x Routing VLANs to Internet

Re: Routing VLANs to Internet Cisco 2960 X