Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
While attempting an FMC upgrade the upgrade failed with the following message in the CLI: The Cisco 6.6.5 upgrade has halted, status: [48%] Fatal error: Error running script 800_post/021_reinstall_sru.sh. For more details see /var/log/sf/Cisco_Firep...
We have been live for about 3 weeks with ISE 2.4 using RADIUS authentication on our production wireless network. On Monday we started getting "No Data available" in Home>System Summary. Even though authentications appear to still be working, the RADI...
We are installing a BBSM in a multiLAN config. How can you get BBSM to function with network devices that are not on the same physical VLAN (broadcast domain) as the management VLAN? I can ping the network devices from BBSM but clients attempting to ...
The TAC engineers discovered that we were running into bugs CSCvu23149 and CSCvw35657 titled "FMC upgrade fails at 800_port/021_reinstall due to 520_install_rules.pl failure". After the engineer performed the workaround described in the bug report h...
Hi Marvin, Thanks for the information. I am working with the TAC right now. They suspected it may be related to bug CSCvr62480. So far they tried modifying CSMagent.pm and adjusting an inactivity timer and restarting the update only to get the same ...
The bug I ran into had not affected SSH yet. The bug we had first caused the Home>System Summary to stop showing the system health information. Two days later the RADIUS Live Logs stopped working. I was able to SSH into the servers to perform a reloa...
Thanks for the response! That is the exact same bug the TAC thought we are running in to. I ended up reloading the secondary server, promoting it to primary, then reloading the other server. The appears to have fixed the System Summary and RADIUS Liv...
