Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Here is the case. We have to deny telnet to group of devices for particalar user. The IP addresses of the hosts are in range from 192.168.1.1 to 192.168.1.5 The following is the TACACS+ server config:user = test { default service = permit login...
HI,We have a problem with port-security cleaning of a sticky secure MAC address in 3750 switch working in stack configuration. Although, we make up a procedure of cleaning as is exactly described in the Catalyst 3750 Switch Software Configuration Gui...
Is it possible to be configured 10Mbps ethernet(AMD Presidio2,2611 IOS12.0(7)T) in full-duplex mode? Router accepts IOS statment (router(config-if)#full-duplex) but interface's neighbour negotiates in half-duplex mode.
Thank you! I have to clarify that mentioned IP pool is in regard to permitted devices.Our problem was for initial telnet session from host that is not outhorized from TACACS+ group. In that case telnet is allowed for all the devices. For all other bo...
