Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have activated the GPS stream on the 829 and can internally reverse telnet to it while in on the console. However, connected to one of the Ethernet ports, I cannot create an active telnet (or other session type) to the port (2007 for TTY, though I...
Okay, the solution I wanted was NOT the one that was available, at least that anyone could help me with. The one that actually worked (the TCSHL script didn't work for me) was this one by sburton011 from the NMEA over UDP thread:
"
sburton011
C...
My hope was to let GPS Gate see the GPS Stream over the IP connection. The software is very flexible for input. I can use a standard GPS stream from a USB, UDP type, etc. I could probably just have it pay attention to the stream coming off the USB...
Thank you for your response.
I'm trying to use a PC plugged into the Ethernet Ports and retrieve the NMEA data stream. I can use an application like GPS Gate to retrieve the stream but I need to verify it's there to begin with.
The PC can access the...
Thank you for the response. I had chosen this forum because it was the one that the other GPS question got discussion under. It sorta made sense because GPS is a function of the Cellular Wireless feature of the router. I'll try this question over ...