Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a site-to-site VPN setup and it is working accordingly, but my problem is that I can not seem to print through the VPN tunnel.Here is the topology:SiteA - PIX ===vpn tunnel==== - PIX SiteB We have a citrix based environment, from SiteA we can ...
I have a simple VPDN setup on a remote Pix, the problem I am encountering is this -If I run the VPN client from a laptop that is connected on my local LAN, I get connected to the remote Pix via the client but can not seem to ping anything on the remo...
Hi,I have a question on VPN tunnel, at the moment I have a site-to-site tunnel setup from HQ to Remote Site B, this is working fine but I have a need to add another site to HQ, i.e. Remote Site C.HQ (Site A) --------------- (Remote Site B) | ...
Steve,Tried your suggestion BUT that didn't work! It actually stoped the vpn client from authenticating.So took your suggestion off and back to were I was before.All I want to do is to be able to use the vpn client to connect to a remote pix when I'm...
Steve,If I disconnect from my LAN and use modem dial-up with the vpn client it works fine. But as I said before, I would like to use the vpn client to connect to remote Lan's from my Lan.I setup debug on my Lan pix and when I ran the vpn client from ...
Steve,Thanks for the reply, but I thought of what you suggested but it don't work!Let me try to clarify my problem:I have a Cisco vpn client on my PC. My PC is connected to my private LAN with say PC ip 10.0.9.10 /24 and default gateway to the inside...
