Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have an ASA 5540 which I want to block certain outside IPs say, 10.190.1.0/24 to access certain inside IP, say 10.199.10.5. Can I achieve this with an ACL? I can do it with the firewall at 10.199.10.5 but prefer for it to be all done insi...
Hi All,
I am experimenting with an ASA 5540 running 8.0(2).
The inside interface faces our network with Windows 2008 R2 domain controller and the outside (not really the outside, just separated network with lower security setting) faces some work...
Hi All,
I am experimenting with an ASA 5540 running 8.0(2).
The inside interface faces our network with Windows 2008 R2 domain controller and the outside (not really the outside, just separated network with lower security setting) faces some work...
I just realised there was a way to do this which is via routes. So basically, create a route for the outside interface to route specific IP addresses to 0.0.0.0.
Hi Francesco,
Thank you for the reply but I do not want to use NAT and our IOS is 8.0 so no chance of adding the objects required. I have resorted to modifying the individual inside servers' firewalls to block the outside IP ranges.
Cheers,
Vlad
All good now John. Cheers for the link. Was missing some of the ports for the ACLs and the port range on the DC and client boxes.
One question remains though. At the moment, I can remote mount high side drives from the low side PCs. Is there a way ...
