About youtv

youtv · 01-25-2018

Our Rv345 is used in a colocation center and we have 2 static IPs from my ISP. Setup of the first WAN port is working fine. As soon as we want to configure the second IP on the WAN 2, we can't save and get the error message: The IP Address setting ...

youtv · 02-02-2018

Hi @chrihussey - thanks for your help. We really appreciate this! We tried to configure both WAN interfaces as load balanced interfaces (Step 2). We switched back and tried again to configure the IP in the same subnet. No success :( Still the same e...

youtv · 01-29-2018

Thanks for the answer, but the Multi-WAN configuration is for the policy based routing ... (when to use WAN1 and when to use WAN2). Still stuck to set the main configuration of WAN2 under "WAN settings" (page 37 of https://www.cisco.com/c/dam/en/us/t...

youtv · 01-15-2018

Hi! We have the same problem: IP for WAN1 = 46.XX.YY.12 IP for WAN2 = 46.XX.YY.13 SUB: 255.255.255.240 We can't add the second IP on WAN2 (static IP) because we always get the error message: "The IP Address setting conflicts with an existing inter...

Member Since	‎01-15-2018 04:00 AM
Date Last Visited	‎02-13-2018 06:05 AM
Posts	4

User Statistics

User Activity

Rv345 second WAN port won't accept static IP

Re: Rv345 second WAN port won't accept static IP

Re: Rv345 second WAN port won't accept static IP

Re: Rv345 wan 2 issue