Thank you all for the good comments. I have put some icing on the cake and modified the document to help further. Feel free to review and comment on it. Some highlights from my edit to the original document (thanks for the nice document):
1. Download...
To test whether the mac address is recognized at the port level - you can plug the new PC into a different port and see you can find the mac address on that port. As I mentioned before use the #sh mac address table int g1/0/10 (use the correct port n...
Nick,
Cisco phone has an un-managed workgroup switch inside it with two ports. One port plugs into the data jack and other one plugs in to the PC. When you connect another unmanaged switch to the PC port it is like cascading workgroup switches. So th...
The way cisco phone works is little interesting. Basically phone and the PC are in different vlans. But you don't need a trunk port. Here is a post that explain it:https://supportforums.cisco.com/t5/ip-telephony/how-does-the-cisco-ip-phone-work/td-p/...
