About lana.deere

lana.deere · 02-01-2018

I previously had an ASA5505 with VPN working to a different ASA5505 at another site. My ASA5505 broke I replaced it with an ASA5506, Firepower Thread Defense version (ASA5506-FTP-K9). The web-based Firepower Device Manager is very different from the ...

lana.deere · 02-06-2018

In response to my own question about interface inside1_2, I tried putting an external switch on inside1_2 and transferring the connections from the other inside1_X ports to the external switch. This solved the problem. I haven't the slightest idea ...

lana.deere · 02-05-2018

I tried setting up capture and now I'm wondering why the interface mention in the original message is inside1_2, and why the packets are captured there when I capture. firepower# show capcapture into7 type raw-data interface inside1_7 [Capturing - ...

lana.deere · 02-05-2018

For the benefit of anyone coming across this thread, to get into the appropriate mode for packet capture connect to the command line interface via the USB cable and terminal emulator software, then: From cli, run 'system support diagnostic-cli' > s...

lana.deere · 02-02-2018

How do I apply a packet capture on an interface? I will try it, but I don't see anything on the web interface's menus which looks like packet capture. I know very little about the CLI.

Member Since	‎02-01-2018 10:43 AM
Date Last Visited	‎02-07-2018 09:34 AM
Posts	5

User Statistics

User Activity

site-to-site vpn ignores remote-to-local accesses

Re: site-to-site vpn ignores remote-to-local accesses

Re: site-to-site vpn ignores remote-to-local accesses

Re: site-to-site vpn ignores remote-to-local accesses

Re: site-to-site vpn ignores remote-to-local accesses