Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey all!I ran into an issue where our firewall was dropping a lot of packets both through and to it. The output of 'show asp drop' showed that the amount of drops for TCP Out-of-Order packet buffer full (tcp-buffer-full) and TCP Out-of-Order packet ...
Hi All! We have a few projects that are looking to take advantage of the free DNA Appliance offer. These networks have yet to be implemented and there has been some concern about what will happen if the network connection between the switch and the ...
Hi all, first time poster, long time lurker.
I have two vlans on a L3 switch (2960-XR w/IP Lite), one (vlan 10 - SVI: 10.1.1.250/24) that needs to be able to connect to others via EIGRP over VPLS, and one (vlan 20 - SVI: 10.2.2.250/24) that needs t...
I know this is an old thread, but I had the same symptoms and was able to find a solution.
After connecting to the vFTD with SSH I used 'su admin' with the default password 'Admin123' where it gave me the first time set up wizard. After going thro...
Hi Georg,Yes, I have considered that approach.My concern is that there are dozens of other L3 switches in the network all carrying the same IP range and I'm trying to mitigate the risk of duplicate IPs being propagated throughout. I know that using ...
