About skylite065

skylite065 · 08-16-2004

Hi,I had setup a Layer 2 Etherchannel between 2 box of Catalyst 6509 with Master & Slave SUP-720. I had configured VLAN2, VLAN3 & VLAN4 on both boxes as well.However, when I do a "sh ip route", one box would show 3 directly connected VLAN interface b...

skylite065 · 08-07-2004

Hi,What is the difference between Layer 2 & Layer 3 EtherChannel? I need to setup an EtherChannel between two 6500 switches with VLAN trunking. Should I use Layer 2 or Layer 3 EtherChannels? Thanks!

skylite065 · 08-18-2004

Oh yes, the VLAN config at SWITCH1 is as below:interface Vlan1 no ip address shutdown!interface Vlan2 ip address 192.168.1.1 255.255.255.0!interface Vlan3 ip address 192.168.2.1 255.255.255.0!interface Vlan4 ip address 192.168.3.1 255.255.255.0

skylite065 · 08-18-2004

Thanks for your help! Yes, the Etherchannel trunk carries all the 3 VLANS. The config is as below. For the VLAN2, VLAN3 & VLAN4, the following 3 lines of config appears in one of the box but not the other box. no ip igmp snooping explicit-tracking n...

Member Since	‎08-07-2004 03:55 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	4

User Statistics

User Activity

Layer 2 Etherchannel on Catalyst 6509 with Master & Slave SUP-720

Layer 2 & Layer 3 EtherChannel

Re: Layer 2 Etherchannel on Catalyst 6509 with Master & Slave SU

Re: Layer 2 Etherchannel on Catalyst 6509 with Master & Slave SU