Hello,
i'm trying to connect a windows 2012 R2 serveur using nic teaming (2 * 10Gb) in switch independant mode to two Nexus 9000 series switch with a vpc configuration.
here the conf on both switches :
interface port-channel33 switchport mode ...
Test without port-channel, it doesn't work better.
I noticed something with the traffic on port-channel 33 running sh port-channel traffic interface port-channel 33
primary nexus
ChanId Port Rx-Ucst Tx-Ucst Rx-Mcst Tx-Mcst Rx-Bcst...
Hello,Still have the issue since it doesn't work as high availibility, even with two link (Nexus 1 and 2), only Nexus 2 is effective, there is something wrong on the primary nexus...Will try to configure without port-channel as you suggested yesterda...
Will try tomorrow without port-channel.
Already tried LACP with channel-group mode active and NICTeaming LACP. But the primary nexus (again...) don't accept the active mode, he stay in "mode on" causing a channel-group mode consistency mismatch with ...
i don't understant why... but with 10Gb plugged on each Nexus it works now. I have just exchange both optical fiber from the server NIC...
But the original issue is still here, if i physically unplug the port 33 from first nexus (win 2k12) network is...
